Dosing Pump BWT Easy Dose

The dosing pumps BWT Easy Dose offer an efficient automatic solution for the control of the pH, chlorine, salt chlorination and flocculant in pools. With advanced technology and ease installation, guarantee a management precisa and safe of water.

Carateristic main of the range of dosing pumps Easy Dose of BWT

• Control preciso of dosing: Adjusts the quantity of product depending on the conditions of water.
• easy to install: System preconfigured that allows a colocation quick and without complications.
• System of alertas: Notifications that advierten on levels low of product or sobrecarga in the dosing.
• Monitoreo continuous: Evaluation in time real for a fit automatic and efficient.
• High resistance: Protection IP65 against moisture and other factors externos.
• Compatible with distintos systems: operates with a wide Variety of equipment of filtration.
• Maintenance simplificed: Design designed to facilitate cleaning and use diario.

Key Features of the Dosing pump Easy Dose pH of BWT

• Dosing proportional depending on the requirements of water.
• Quick installation and safe thanks to its design pre-cableed.
• Alarmas of safety for exceso of dosing, product agoted and umbral sobrepased.
• Protection IP65, resistant to environments wet.

The Dosing pump Easy Dose pH of BWT includes

• pH Probe of 6 metres.
• Kit installation.
• Solutions of calibration pH4 and pH7.
• Collar DN50 for Probe e injection-moulded chemical.

Key Features of the Dosing pump Easy Dose Rx of BWT

• Dosing proportional for a control preciso of the chlorine.
• Calibration simple with evaluation of the condition of the Probe.
• Alarmas of safety to prevent errores in the dosing.
• Quick installation with system pre-cableed and watertightness guaranteed.

The Dosing pump Easy Dose Rx of BWT includes

• Probe Redox (platino) of 6 metres.
• Kit installation.
• Solution of calibration 465 mV.
• Collar DN50 for Probe e injection-moulded chemical.

Key Features of the Dosing pump Easy Dose Rx Salt Chlorination of BWT

• Control On/Off of the salt water electrolysis depending on the level of Redox.
• measurement in time real with fit automatic.
• Alarmas of safety for a use efficient and safe.
• Protection IP65 for a greater durability.

The Dosing pump Easy Dose Rx Salt Chlorination of BWT includes

• Probe Redox (oro) of 6 metres.
• Kit installation.
• Solution of calibration 465 mV.
• Collar DN50 for Probe.

Key features of loa Dosing pump Easy Dose Flocculant of BWT

• Dosing continuous for a clarity excepcional of water.
• Compatible with any filtration system.
• Alarma of exceso of dosing.
• Easy installation and maintenance.

The Dosing pump Easy Dose Flocculant of BWT includes

• Kit installation.
• Collar DN50 for Probe.

Recomendations for a correct installation and use of the Dosing pump Easy Dose of BWT

• Ubication suitable: installs the pump in a Dry place and protected of the intemperie.
• Calibration regular: Revisa and calibra the sondas regularly.
• Maintenance preventive: Inspecciona the system and cambia the pipes if is necessary.
• Verification of the product chemical: Make sure of that haya sufficient product in the tank.
• Compatibility: USA chemical products adecued for each type of dosing pump.

Technical specifications of the Dosing pump Easy Dose of BWT