Return Inlet Multiflow Solvent-weld Concrete AstralPool

The Return inlet Multiflow solvent-weld for concrete AstralPool is an efficient solution and easy to install to ensure an optimum water circulation in pools of concrete. designed with a body more length to facilitate its installation and renovation, this inlet adapts a different requirements thanks to its exclusive Multiflow system.

Thanks to its innovative design, the inlet Multiflow allows select the diameter of outlet suitable in the point of the installation, optimising the water flow rate depending on the requirements of the pool.

Key Features of the Return inlet Multiflow solvent-weld for concrete AstralPool

• Connection for encoled: is easy to install in the indoor of the tube Ø50mm PN 10.
• new design of body length: Its length of 79 mm reduces the risk and facilitates the installation in pools already existentes.
• manufacture in ABS: material of high resistance with UV treatment for greater durability.
• Easy installation: Only needs hacer a small agujero in the end of the tube, limpiarlo and solvent-weld the inlet from the indoor.
• Multiflow System: Allows select the diameter of the inlet in the point of the montaje.
• Variety of colours: Available in white, beige, light grey and grey anthracite for a mejor integration estetic.
• Complies with standard: Certificed low the European standards IN 16582-1 and IN 16713-2.

Colours available of the Inlets of Discharge Multiflow solvent-weld for concrete AstralPool

Multiflow system: fit of the flow rate with the Return inlet Multiflow solvent-weld for concrete AstralPool

The Multiflow System allows adjustment of the flow rate of outlet seleccionando the diameter of the inlet in the point of the installation. The inlet supplied with three diameters premarced that can activarse with the helps of a punch:

Benefits of the Return inlet Multiflow solvent-weld for concrete AstralPool

• Optimization of the flow: Fit of flow rate using the Multiflow system.
• Greater rapidez in renovations: installs without the need to carry out large modifications in the pool.
• resistant to chemical products: manufacture in ABS with treatment UV.
• Design adaptative: Available in various colours to integrate with the lining of the pool.

As install the Return inlet Multiflow solvent-weld for concrete AstralPool?

1. Preparar the tube: Hacer a small agujero in the end of the tube of Ø 50 mm.
2. Clean the surface: Ensure that not haya debris before of solvent-weld.
3. Aplicar adhesive: Extender pegamento in the indoor of the tube and in the inlet.
4. fit the inlet: Insertarla firmly in the tube.
5. Adjust the diameter: select the size suitable with a punch.
6. Listo! The inlet is instaled and ready for its use.

Frequently asked questions on the Return inlet Multiflow solvent-weld for concrete AstralPool

• Puedo install this inlet in any pool? Not, is specifically designed for concrete pools with pipes of Ø 50 mm.
• Is resistant to the chlorine and the salt? Yes, its material ABS with treatment UV the hace resistant to chemical products and conditions environmental adversas.
• As elijo the diameter suitable? Depende of the flow rate deseed. you can perforar the inlet with a punch in the diameter that mejor adapte a your pool.

The solution for that your pool luzca as new with the Return inlet Multiflow solvent-weld for concrete AstralPool