Return Inlet Multiflow Solvent-weld liner AstralPool

The Return inlet Multiflow solvent-weld for liner AstralPool is an effective solution and easy to install to optimise the water circulation in pools with liner. Its new design with body more length facilitates the installation and the maintenance, allowing a integration perfect with the lining of the pool.

Thanks to its exclusive Multiflow system, this inlet allows select the diameter of outlet suitable in the point of the installation, ensuring the mejor performance hydraulic for each pool.

Key Features of the Return inlet Multiflow solvent-weld for liner of AstralPool

• Installation using encoled: fija in the indoor of the tube Ø50mm PN 10.
• new design of body length: Its length of 79 mm reduces the risk and facilitates the installation in pools already existentes.
• material of high resistance: Manufactured in ABS with UV treatment for greater durability.
• Easy installation: Only needs hacer a small agujero in the end of the tube, limpiarlo and solvent-weld the inlet from the indoor.
• Multiflow System: allows adjustment of the diameter of the inlet in the point of the installation.
• Accessories included: gaskets of sealing and fixings for a fixing safe.
• Variety of colours: Available in white, beige, light grey and grey anthracite for a mejor integration estetic.
• Complies with standard: Certificed low the European standards IN 16582-1 and IN 16713-2.

Colours available of the Return inlet Multiflow solvent-weld for liner of AstralPool

Multiflow system: fit of the flow rate of the Return inlet Multiflow solvent-weld for liner of AstralPool

The Multiflow System allows adjustment of the flow rate of outlet seleccionando the diameter of the inlet in the point of the installation. The inlet supplied with three diameters premarced that can activarse with the helps of a punch:

Benefits of the Return inlet Multiflow solvent-weld for liner of AstralPool

• Adaptability total: designed specifically for liner pools.
• Optimization of the flow: Fit of flow rate using the Multiflow system.
• Greater rapidez in renovations: installs without the need to carry out large modifications in the pool.
• resistant to chemical products: manufacture in ABS with treatment UV.
• Design adaptative: Available in various colours to integrate with the lining of the pool.

As install the Return inlet Multiflow solvent-weld for liner of AstralPool?

1. Preparar the tube: Hacer a small agujero in the end of the tube of Ø 50 mm.
2. Clean the surface: Ensure that not haya debris before of solvent-weld.
3. Aplicar adhesive: Extender pegamento in the indoor of the tube and in the inlet.
4. fit the inlet: Insertarla firmly in the tube.
5. Adjust the diameter: select the size suitable with a punch.
6. Listo! The inlet is instaled and ready for its use.

Frequently asked questions on the Return inlet Multiflow solvent-weld for liner of AstralPool

• Puedo install this inlet in any pool? Not, is specifically designed for liner pools and pipes of Ø 50 mm.
• Is resistant to the chlorine and the salt? Yes, its material ABS with treatment UV the hace resistant to chemical products and conditions environmental adversas.
• As elijo the diameter suitable? Depende of the flow rate deseed. you can perforar the inlet with a punch in the diameter that mejor adapte a your pool.

Not you confundas, elige well that type of Inlet Multiflow of AstralPool is the ideal for your pool