Test kit Analysis for Dureza Total ftk-118

The Fast Test Kit FTK-118 is a test of campo designed to measure the dureza total of water using the method Drop Test (test of gotas). Is a tool essential to ensure the balance of water in pools, spas e installations industrial.

Key Features of the Kit Dureza Total FTK-118

• Method of measurement: Test of gotas (Drop Test).
• Escala of measurement: 1 gota equivale a 10 ppm of CaCO3.
• Capacity of the kit: Up To 72 meditions with the reactive supplied.
• Result precise: Easy interpretation thanks to the cambio of colour of the muestra.

Importance of measure the Dureza of the Water with the Kit Dureza Total FTK-118

The dureza of water is the quantity of salts of calcio and magnesio disueltas in the water. Keep a level suitable it is essential to prevent problemas in pools and filtration systems.

Instructions of Use of the Kit Dureza Total FTK-118

1. Preparation: Limpie and llene the cubeta up to the brand of 15 ml.
2. Addition of the indicador: Agregue 5 gotas of the reactive TH-11 and mezcle. If hay dureza total, the water tornará rosa.
3. Titulation: Add gota a gota the reactive TH-12, agitando after each addition, up to which colour cambie of rosa a blue.
4. Cálculo of the result: Each gota agreged equivale a 1 °fH (grade French). Multiplique the number of gotas for 10 to obtain the dureza total in ppm.

Content of the Kit Dureza Total FTK-118

• Indicador of dureza total TH-11: Frasco of 22 ml.
• Reactive of dureza total TH-12: Frasco of 22 ml.
• Tube of muestra of plastic: Capacity of 15 ml.

Recomendations of the Kit Dureza Total FTK-118

• If the dureza is upper a 400 ppm, it is recommended the use of a anti-limescale to prevent scale deposits.
• If the dureza is lower a 200 ppm, is important revisar the pH and the alkalinity of water.
• For a analysis more complete, you can complementar with Test Strips available in our tienda.