SEKO Tekna TPG Electromagnetic Dosing Pump

The pumps SEKO offer solutions for inyectar liquid in conductos and pipes from small pools a large installations aquatic. In environments of indoor and outdoor, depending on the model, can measure parameters as pH, ORP, conductivity, chlorine, oxygen, turbidez, ozono, bromo, etc. In our archive adtogether withs, will be able to encontrar a listed with the compatibility of the body, gaskets and pipes of the dosing pumps depending on the product chemical that require dosificar.

why elegir the dosing pump Tekna TPG?

The series Tekna is a range of dosing pumps driven for solenoids with analogue or digital range with dosing constant or proportional. These dosing pumps multifunctional ensure high performance for the chosen applications chosen and provide high reliability ensuring the compatibility chemical in the parts wet.

features stands outbles of the dosing pump Tekna TPG from the brand SEKO

• Pump electromagnetic Digital with flow rate adjustable manually, dosing proportional a inlet analogue or signals digitales
• The alimentation standard of the pump is of 100-240Vca 50-60Hz.
• Shower Heads standard in PVDF
• Membrane in material PTFE
• Incorporates valve to carry out bleed valve Manual
• The housing is formed for plastic PP, Reinforcement in fibreglass and protection IP65.

Funcionalities of the dosing pump Tekna TPG of SEKO

• Dosing Manual
• Dosing proportional with signal 0/4-20 mA or with signal 20-4/0 mA,
• Dosing with impulsos externos:
  • Multiplication
  • Division
  • Dosing bath: the pump dosifica proporcionally to the recibir a signal externa (ejemplo: contador lanza impulsos)
  • Dosing proportional in ppm
• Function temporizador
• Programation of the maximum flow rate
• Programation of relay of alarma
• Calibration of the flow rate: can calibrar manually or automatic
• Estadistic: number of golpes, quantity dosificed for the pump, number of puestas in operation
• Contraseña: can entrar in programation and ver all the valuees programed
• Alarma of flow: allows activar or desactivar the flow sensor
• Alarma of level
• Inlet on-off (paro / operation remote)

Technical specifications of the pump Tekna TPG for dosing of chemical products in pools

Content of the box of the dosing pump Tekna APG from the brand SEKO

• Pump complete
• Filter of bottom
• Adaptor of injection-moulded
• 4 metres of tube in PVC (transparent and flexible), for the suction and for the connection of the valve of bleed valve for the cebadura Manual
• 2 metres of tube of PE (opaco and rigid), for the connection of the outlet of the pump with the point of injection-moulded
• Wall Plugs for a fixing of the pump
• Support for the montaje of the wall
• Manual of instructions
• Cable of alimentation (2m)