Frost Sensor Hunter Freeze-clik

The Sensor of Frost Hunter Freeze-Clik is a dispositive cableed that protects the systems of riego automatic against conditions of congelation, preventing damage in the areas ajardined, pasarelas and carreteras. This sensor detiene automaticaly the operation of the aspersores when the temperature reagents levels cercanos a 0°C, providing safety and efficiency in time invernal.

Key Features of the Sensor of Frost Freeze-Clik of Hunter

• 
  
• Protection automatic: Interrumpe the system of riego when the low temperature of 3°C (+/- 2°C).
  
• Easy installation: Compatible with systems of riego Hunter, not requires ajustes additional.
  
• Reactivation automatic: When the temperature exceeds the umbral establecido, the sensor allows which system vuelva and its cycle normal.
  
• Compatibility: Improves the efficiency to the combinarse with other sensores Hunter.
  
• Durable: includes a cable apantalled of 7 m aprobed for the UL, it that ensures confiability long-term.
  

Benefits of Use of the Sensor of Frost Freeze-Clik of Hunter

• 
  
• Prevention of accidentes: Prevents the formation of hielo in areas ajardined, carreteras and pasarelas.
  
• Savings of water: Detiene the riego innecesary during conditions of helada.
  
• Efficiency improved: When combines with other sensores, optimises the management of the riego.
  
• Safety: Prevents the peligro asocied with aspersores activos in conditions of congelation.
  

Technical Specifications of the Sensor of Frost Freeze-Clik of Hunter

• 
  
• Temperature of activation/desactivation: 3°C (+/- 2°C).
  
• Clasification of the interruptor: 24 V CA, 5 A.
  
• Cable included: 7 m of cable apantalled, two conductores of 0,5 mm².
  
• Aprobations: UL, cUL, FCC, CE, RCM.
  

Instructions installation of the Sensor of Frost Freeze-Clik of Hunter

Preparation

1. 
   
2. Identifique a ubication suitable for the sensor, preferiblely expuesta to the air free but protected of damage mechanical.
   
3. Recoja the tools necesary, as destornilladores and elementos of montaje.
   

Installation

1. 
   
2. Fije the sensor a surface stable utilizando the soportes included.
   
3. Conecte the cables of the sensor to the programmer of riego compatible depending on the esquema proporcioned in the Manual.
   
4. Ensure of which connections are firmes and seguras.
   

Prueba

1. 
   
2. Simule a temperature lower a 3°C for verificar which system of riego detenga Correctly.
   
3. Compruebe which riego reactive automaticaly when the temperature suba for encima of the umbral establecido.