5-in-1 Chlorine Tablets 250g Liner Special Agonet 5 kg

Agonet 5-in-1 Liner Special Chlorine Tablets — 250 g · 5 kg

Agonet 5-in-1 chlorine tablets (250 g, liner special) are the all-in-one water treatment solution for pools lined with liner, polyester, vinyl or membrane. Their copper-free formula removes the biggest risk associated with standard chlorine tablets in this pool type: the permanent blue-green stains that copper can cause on pool linings — damage that cannot be undone.

5 actions in every tablet

• ? Disinfection — Eliminates bacteria, viruses and microorganisms by oxidation, keeping pool water safe and hygienic for swimmers.
• ? Algae prevention — Prevents and eliminates green, black and yellow algae, keeping water clear and inviting at all times.
• ? Flocculation — Binds suspended particles and organic matter so the filter can remove them efficiently, resulting in crystal-clear water.
• ? Scale inhibition — Prevents calcium build-up on the waterline, walls and floor; especially effective in hard-water areas.
• ? pH stabilisation — Helps maintain pH between 7.2 and 7.6, extending the effectiveness of chlorine and reducing the need for manual pH corrections.

Product specifications

• Reference: XAK60705SC
• Brand: XAKA / Agonet
• Active ingredient: Stabilised trichloroisocyanuric acid
• Format: White cylindrical tablets, 250 g each
• Pack size: 5 kg bucket
• Copper-free: Safe for liner, polyester, vinyl and membrane pools
• Recommended pH range: 7.2–7.6
• Free residual chlorine target: 0.5–2 mg/l
• Maintenance dose: 1 tablet per 35 m³ of water every 5–7 days
• Application method: Place tablet in the skimmer with the filter pump running
• Not suitable for: Inline dosers, diatomaceous earth filters or cartridge filters

Why choose liner-specific chlorine?

Liner and polyester surfaces are particularly vulnerable to the copper sulphate found in many standard chlorine tablets. Prolonged contact causes permanent blue-green staining on the lining that cannot be removed. The Agonet Liner Special formula replaces copper sulphate with lining-compatible actives, delivering the same disinfection performance with zero risk to the pool surface.

Instructions for use

1. Adjust pool water pH to 7.2–7.6 before adding the product.
2. Place the tablet directly in the skimmer with the filter pump running.
3. Check free chlorine level (0.5–2 mg/l) every 5–7 days and top up as needed.
4. Do not mix with other chemicals: risk of dangerous gas release.

To avoid risks to people and the environment, always follow the instructions for use. Keep out of reach of children. Store in a cool, dry place away from heat sources.