Sellador Fugas Sb-pool Superpool 1 Litre

SB-Pool Sealer is a material Mixed and concentrated, manufactured to seal escapes in, practicaly, any material. trata of a reparador of leaks for all types for pools and tanks even in the systems of pipes. Acts in 24-48 H. can aplicar in material acrylic, fibreglass, morteros, timber, plastic vinílico, paint or ceramic.operates igually well with the materials more usuales in the manufacture of pipes as PVC, ABS, Copper, steel, ect..

SB-Pool Sealer is a agente inhibidor of the corrosion and not deteriora the indoor of the pools ni spas.

Features of the Sellador of leaks Superpool of Fluidra

• pack: 1L with Plug of sergurity.
• appearance/Colour: Liquid viscous white
• Density (a 20 ºC): 1,393 - 1,396 grs/cm³
• pH (a 20 ºC): 11 - 11,5
• Performance: 1L SEALER for each 80 m³ of water

Directions for use and dosing of the Sellador of leaks Superpool of Fluidra

• Llenar for complete the pool, spa, etc.
• For pools with filter of Silica or diatomeas, poner the valve of the filtration system in position of recirculation. For pools with other type of filters it is recommended quitar the elementos filtrantes or alternatively efectuar a by-pass of the filter, before of adicionar.
• Agitar ALWAYS the botella before of use.
• Poner the filtration system in operation and adicionar despacio the dosis recommended for the skimmers or alternatively, in pools desbordantes, directaly to the pool cerca of the inlets of discharge to facilitate the homogeneization of the product.
• The product is very denso and has tendence a depositarse quickly in the pool bottom. To prevent this, it is recommended remover the area where has deposited using a Brush.
• Regular the valves of the filtration system for concentrar the suction from the main drain (pisc. with skimmers). Keep the filtration system in operation position recirculation- up to which/s fisura/s hayan sealing and not pierda water. estima a minimum of 24 48 hrs
• Marcar the water level of the pool, spa, etc. Verificar during 2 or 3 days that not baje the water level, comprobando thus its reparation.
• A vez the/s fisura/s haya/n desaparecido, poner the filtration system in position filtration (prior reinstalation of the elementos filtrantes that hayan quited during the reparation of the fuga)
• Can repetirse the treatment if not has conseguido a reparation total of the/s fisura/s
• Dosis: Add 1 Lt of SB-Pool Sealer for each 80 m3 of water.
• In case of use a concentration greater of 5 Lts. of product for 80 m3 of water, it is recommended cambiar the water before of use the pool, spa, etc...

Note: These dosis are of character indicative and can ser modified depending on the situation and of the type of fuga. The efectivity of the product will depend of the dimension of the fisura.

Visualice the video before of aplicar the Sellador of Leaks SB-POOL Superpool of Fluidra