The cells of spare part BSV Touch Evo are designed to ensure the maximum performance and durability of the systems of salt chlorination Touch Evo and Touch Evo MG of BSV Electronic. These cells allow the production of chlorine of high efficiency, ensuring an optimum quality of water in pools of different sizes.
features destaced of the Cells of the Spare Part Touch Evo of BSV
- material: panels of titanium high-quality, designed for resistir the corrosion and maximise the generation of chlorine.
- Duration: service life aproximed of 10,000 hours.
- Compatibility: Compatible with salt water chlorinators BSV Touch Evo 15, 20, 25 and 35, as well as with the models Touch MG 15, 25 and 35.
- Voltage maximum: 22 Vcc, providing stability and safety during the operation.
- Not includes: Vaso portaelectrodos ni Cable connection.
Comparison Table of Models of the Cells of the Spare Part Touch Evo of BSV
| Model | Production of Chlorine (g/h) | Voltage Maximum (Vcc) | Section of the Cable and length |
| RP15BI | 15 | 22 | 4 mm x 1,5 m |
| RP20BI | 20 | 22 | 4 mm x 1,5 m |
| RP25BI | 25 | 22 | 4 mm x 1,5 m |
| RP35BI | 35 | 22 | 4 mm x 1,5 m |
Instructions of Use of the Cells of the Spare Part Touch Evo of BSV
- Preparation:
- Apaga the system of cloration before of carry out the cambio.
- Confirma which model of the cell whether compatible with your chlorinator.
- Installation:
- Retira the cell antigua with careful.
- Coloca the new cell, ensuring a connection firme with the pool shell portaelectrodos.
- Prueba:
- Enciende the system and check which cell funcione Correctly.
- Make sure of which level of chlorine in the water whether the suitable.
tips for the Optimum Performance of the Cells of the Spare Part Touch Evo of BSV
- Keep the levels of salt recommended for the fabricant.
- Clean the panels of titanium periodicaly to prevent tanks of cal.
- Revisa the connections and the pool shell portaelectrodos with regularity.
- Prevents exponer the chlorinator a temperatures extremas.