Pre-filter Hidrociclónico Hydrospin AstralPool

pre-filter hidrociclonico that allows the savings of water and extend the service life of the filtration system for pools private.

Description Pre-filter Hydrospin

The Pre-filter hidrociclónico of cleaning supports treat flow rates as maximum of 30m3/h and allows its installation in new or Existing installations.

This model of pre-filter, features with a pressure of up to 2,5 bar. of working. Is positioned between the pump and the filter, this hace that separe debris solid of up to 40 micras reducing to the mitad the gasto of water.

The HydroSpin features with a almacenaje of debris of 3 sectores distintos. Its easy maintenance is possible with You only need 5 litre of water and can carry out while the pump sigue in operation.

Features of the pre-filter Hydrospin of AstralPool

• The HydroSpin has a tank of recogida of solid with 3 areas diferencied (decantation, clarification and espesamiento).
• can clean with only 5 litres of water without the need for parar the pump.
• Reduction considerable of the operations of backwash of the filter, of way that disminuye drasticaly the consumption of water dedicated to the cleaning of the filter.
• Losses of carga bajas that allow instalarlo without the need to change the pump existent.
• can install in the ground with the accessories supplied or in the wall using flanges DN300 (kit of montaje available of way separed, ver complementos and accessories).
• Connections standard Ø63 mm for inlet and outlet of water and Ø32 mm for the evacuation of debris.